6條油壓緩衝器安全注意事項Safety pREcautions for 6 oil buffers

隨著科技的高速發展，工業化進程也隨之加快，油壓緩衝器作為設計、製造的一般產業機械部件的構成要素，在進行選型和安裝時，系統設計者和負責人需要在選擇和安裝中有豐富知識和經驗的人，誤動作會產生危險。 以下為筆者對於油壓緩衝器的安全注意事項作出的歸納，希望對各大使用廠商有幫助。

1、禁止在有易燃物或點火器的地方使用，油壓緩衝器為非防爆型，可能引起火災或引燃其他物質。

2、安裝產品時，必須有可靠的支撐和固定（包括工件）。安裝件必須有足夠的強度，否則會造成產品翻倒、墜落、損壞，造成人身傷害。

3、請勿改造產品。否則，會因運動異常造成人身傷害等事故。

4、請不要將產品進行拆卸或組裝。

5、請不要將水、清潔品等灑進到產品裏。如產品精密性被破壞，產品的性能將受到損傷。

6、在作業過程中，請不要接近產品。此外，設備運行時請不要安裝或調整油壓緩衝器，裝置的突然動作可能會導緻操作人員受傷。

能預見在不遠的將來，工業互聯網必將成為主流，油壓緩衝器在提高產能方面的運用也會大幅增加，筆者建議廣大廠家使用及安裝油壓緩衝器時，注意以上6點注意事項，並實際實施才能將油壓緩衝器的作用發揮至佳。

With the rapid development of science and technology, the industrialization process is also accelerated. As a component element of general industrial mechanical parts designed and manufactured, the system designer and the person in charge of the system need people with rich knowledge and experience in the selection and installation of the hydraulic buffer, and misoperation will cause danger. The following is the author's summary of the safety precautions of the oil buffer, hoping to be helpful to the manufacturers.

1. It is forbidden to use in the plACE with inflammables or igniters. The oil pressure buffer is non explosion-proof type, which may cause fire or ignite other substances.

2. When installing the product, there must be reliable support and fixation (including workpiece). The mounting parts must have enough strength, otherwise the product will overturn, fall, damage, and cause personal injury.

3. Do not modify the product. Otherwise, it will cause personal injury and other accidents due to abnormal movement.

4. Please do not disassemble or assemble the product.

5. Please do not spill water and cleaning products into the product. If the precision of the product is destroyed, the performance of the product will be damaged.

6. Please keep away from the product during operation. In addition, please do not install or adjust the oil pressure buffer when the equipment is running. Sudden action of the device may cause injury to the operator.

It can be predicted that in the near future, the industrial Internet will become the mainstream, and the application of oil pressure buffer in improving production capacity will also increase significantly. The author suggests that the majority of manufacturers should pay attention to the above six points when using and installing oil pressure buffer, and implement it in practice, so as to play the best role of oil pressure buffer.